2.1 Hardware Ports

DS110 and DS210

DS110 and DS210
  Port Function
1 Port USB-A USB mouse/keyboard and USB thumb drive
2 microSD Card Slot microSD card for additional storage
3 RJ45 Port Ethernet connection
4 HDMI Port Display output
5 Port Type-C USB mouse/keyboard and USB thumb drive
6 Audio-Out Jack (3.5mm) Stereo audio output
7 Reset Button Device reset
8 DC 5V Power Jack Power input

DS310

DS 310
Port Function
1 Port USB-A USB mouse/keyboard and USB thumb drive
2 microSD Card Slot microSD card for additional storage
3 RJ45 Port Ethernet connection
4 HDMI-In Port Display input
5 HDMI-Out Port Display output
6 RS-232 (3.5mm) RS-232 serial data
7 Port Type-C USB mouse/keyboard and USB thumb drive
8 Audio-In Jack (3.5mm) audio input
9 Audio-Out Jack (3.5mm) Stereo audio output
10 Reset Button Device reset
11 DC 5V Power Jack Power input
12 GPIO GPIO ports for hardware extension, such as connecting to inputs like buttons and sensors, and/or, outputs like LED lighting and motor control.
(1) The pin-out definition is shown in the picture below.
(2) Connector type: Phoenix
(3) Pin pitch: 3.81mm (0.15″)
GPIO Connector Pin-outs

DS301

DS301
Port Function
1 RJ45 Port Ethernet connection
2 DC 5V Power Jack Power input
3 HDMI Port Display output
4 Audio-Out Jack (3.5mm) Stereo audio output
5 RS-232 Jack (3.5mm) RS-232 control port
6 Reset Button Device reset
7 microSD Card Slot microSD card for additional storage
8 USB-A Port USB mouse/keyboard and USB thumb drive
9 USB-C port USB mouse/keyboard and USB thumb drive

Connecting NovoDS Devices to Display

Step 1 : Connect the NovoDS to a display via the HDMI output port

Step 2 : Connect the AC-DC power adaptor to the DC 5V power jack

Spep 3 (optional) : Connect an Ethernet cable to the RJ45 port (if you need to use LAN connection)

The device comes with a mounting bracket. Typically you can use it to attach the NovoDS device to the back of the display or on the wall.