When there’s no any Wi-Fi access point, NovoTouch can be configured a Wi-Fi Hotspot, and create a local network that can be connected directly for each wireless device.
NOTE: When Wi-Fi is configured as a Hotspot, NovoTouch can only access to the Internet via the Lan network which was already connected to the Internet.
Configure Wi-Fi as a Hotspot
1. Tap More Apps at the bottom-center of home screen;
2. Tap More Apps 
at the bottom-center of home screen; More Apps can also be found by tap the triangle icon at both sides of home screen to enter the Sidebar menu.
3. Tap NT Settings.
4. Tap Hotspot Mode to enter the configuration.
5. Select Enable Wi-Fi Hotspot and select the Wi-Fi Channel in the drop down menu if it is necessary.
6. Wi-Fi Channels are different in both 2.4GHz and 5GHz frequencies. In some countries or regions, the Wi-Fi Channels may be different. We also provide both 2.4GHz and 5GHz Wi-Fi Launcher, please make sure the Wi-Fi frequency settings is correct for working properly with them.
7. After the Wi-Fi Channel is selected, tap Apply and exit.
NOTE: Check the Enable LAN-WiFi-Hotspot routing box if NovoTouch is connected to a router with Internet access.
