2.1 Installing the Wall Mount

Before installing the wall mount ensure the following:

• Installation should only be done by a certified professional.

• Maximum wall mount kit load capacity:150kg (330lbs).

• When setting the display down to install the wall mount, place it face down on a flat and stable surface covered by a protective sheet or cloth and a table cushion as shown in the illustration provided. DO NOT place the display on an uncovered surface.

• Ensure that all the following parts are included in the wall mount kit:

	Models	DK434	DK554	DK654	DK754	DK854
Item	Components	Q’ty
A	Wall Mount	1	1	1	1	1
B	Wall Mount Brackets	2	2	2	2	2

Items	Components	Spec	Size	DK434	DK554	DK654	DK754	DK854
C	Bracket Screws	M6	18mm	x4	x4	/	/	/
D	Bracket Screws	M8	16mm	/	/	x4	x4	x4
E	Wall Screws	Φ7	55mm	x4	x4	x6	x6	x6
F	Anchor Screws	Φ8.8	50mm	x4	x4	x6	x6	x6

To mount NovoDisplay onto a wall follow the instructions below:

NOTE: This display supports landscape and portrait display orientation. Do not mount facing up or facing down.

1. Install the two (B) the wall mount brackets onto the display using the four (C) or (D) bracket screws.

2. Install the (F) anchor screws into the wall you want to mount NovoDisplay on.

3. Install the (A) wall mount frame onto the wall by securing the (E) wall screws to the anchors.

4. Mount the displays’ wall mount brackets onto the wall mount frame.